Graphene sensors find subtleties in magnetic fields

Date:
August 20, 2020
Source:
Cornell University
Summary:
Researchers used an ultrathin graphene 'sandwich' to create a tiny
magnetic field sensor that can operate over a greater temperature
range than previous sensors, while also detecting miniscule changes
in magnetic fields that might otherwise get lost within a larger
magnetic background.



FULL STORY ==========================================================================
As with actors and opera singers, when measuring magnetic fields it
helps to have range.


========================================================================== Cornell researchers used an ultrathin graphene "sandwich" to create a tiny magnetic field sensor that can operate over a greater temperature range
than previous sensors, while also detecting miniscule changes in magnetic fields that might otherwise get lost within a larger magnetic background.

Hall-effect sensor Provided Researchers led by Katja Nowack, assistant professor of physics, created this micron-scale Hall-effect sensor
by sandwiching graphene between sheets of hexagonal boron nitride,
resulting in a device that operates over a greater temperature range
than previous Hall sensors.

The group's paper, "Magnetic Field Detection Limits for Ultraclean
Graphene Hall Sensors," published Aug. 20 in Nature Communications.

The team was led by Katja Nowack, assistant professor of physics in the
College of Arts and Sciences and the paper's senior author.



========================================================================== Nowack's lab specializes in using scanning probes to conduct magnetic
imaging.

One of their go-to probes is the superconducting quantum interference
device, or SQUID, which works well at low temperatures and in small
magnetic fields.

"We wanted to expand the range of parameters that we can explore by
using this other type of sensor, which is the Hall-effect sensor," said doctoral student Brian Schaefer, the paper's lead author. "It can work at
any temperature, and we've shown it can work up to high magnetic fields
as well. Hall sensors have been used at high magnetic fields before, but they're usually not able to detect small magnetic field changes on top
of that magnetic field." The Hall effect is a well-known phenomenon in condensed matter physics. When a current flows through a sample, it is
bent by a magnetic field, creating a voltage across both sides of the
sample that is proportional to the magnetic field.

Hall-effect sensors are used in a variety of technologies, from cellphones
to robotics to anti-lock brakes. The devices are generally built out of conventional semiconductors like silicon and gallium arsenide.

Nowack's group decided to try a more novel approach.



==========================================================================
The last decade has seen a boom in uses of graphene sheets -- single
layers of carbon atoms, arranged in a honeycomb lattice. But graphene
devices often fall short of those made from other semiconductors when the graphene sheet is placed directly on a silicon substrate; the graphene
sheet "crumples" on the nanoscale, inhibiting its electrical properties.

Nowack's group adopted a recently developed technique to unlock
graphene's full potential -- sandwiching it between sheets of hexagonal
boron nitride.

Hexagonal boron nitride has the same crystal structure as graphene
but is an electrical insulator, which allows the graphene sheet to lie
flat. Graphite layers in the sandwich structure act as electrostatic
gates to tune the number of electrons that can conduct electricity in
the graphene.

The sandwich technique was pioneered by co-author Lei Wang, a former postdoctoral researcher with the Kavli Institute at Cornell for Nanoscale Science. Wang also worked in the lab of co-senior author Paul McEuen,
the John A. Newman Professor of Physical Science and co-chair of the
Nanoscale Science and Microsystems Engineering (NEXT Nano) Task Force,
part of the provost's Radical Collaboration initiative.

"The encapsulation with hexagonal boron nitride and graphite makes
the electronic system ultraclean," Nowack said. "That allows us to
work at even lower electron densities than we could before, and that's favorable for boosting the Hall-effect signal we are interested in."
The researchers were able to create a micron-scale Hall sensor that
functions as well as the best Hall sensors reported at room temperature
while outperforming any other Hall sensor at temperatures as low as 4.2
kelvins (or minus 452.11 degrees Fahrenheit).

The graphene sensors are so precise they can pick out tiny fluctuations in
a magnetic field against a background field that is larger by six orders
of magnitude (or a million times its size). Detecting such nuances is a challenge for even high-quality sensors because in a high magnetic field,
the voltage response becomes nonlinear and therefore more difficult
to parse.

Nowack plans to incorporate the graphene Hall sensor into a scanning probe microscope for imaging quantum materials and exploring physical phenomena,
such as how magnetic fields destroy unconventional superconductivity
and the ways that current flows in special classes of materials, such
as topological metals.

"Magnetic field sensors and Hall sensors are important parts of many
real-world applications," Nowack said. "This work puts ultraclean graphene really on the map for being a superior material to build Hall probes
out of. It wouldn't be really practical for some applications because
it's hard to make these devices.

But there are different pathways for materials growth and automated
assembly of the sandwich that people are exploring. Once you have the
graphene sandwich, you can put it anywhere and integrate it with existing technology." Co-authors include doctoral student Alexander Jarjour,
and researchers from the National Institute for Materials Science in
Tsukuba, Japan.

The research was supported by the National Science Foundation and the
Cornell Center for Materials Research, an NSF Materials Research Science
and Engineering Center. The researchers made use of the Cornell NanoScale Science and Technology Facility, and the Columbia Nano Initiative
Clean Room.


========================================================================== Story Source: Materials provided by Cornell_University. Original written
by David Nutt. Note: Content may be edited for style and length.


========================================================================== Journal Reference:
1. Brian T. Schaefer, Lei Wang, Alexander Jarjour, Kenji Watanabe,
Takashi
Taniguchi, Paul L. McEuen, Katja C. Nowack. Magnetic field detection
limits for ultraclean graphene Hall sensors. Nature Communications,
2020; 11 (1) DOI: 10.1038/s41467-020-18007-5 ==========================================================================

Link to news story: https://www.sciencedaily.com/releases/2020/08/200820151339.htm

--- up 5 weeks, 1 day, 1 hour, 55 minutes
* Origin: -=> Castle Rock BBS <=- Now Husky HPT Powered! (1337:3/111)