SpaceX delays Falcon 9 launch carrying private Japanese moon lander

Date:
Wed, 30 Nov 2022 13:25:55 +0000

Description:
SpaceX is readying to use its reliable Falcon 9 rocket to send a privately funded The post SpaceX delays Falcon 9 launch carrying private Japanese moon lander appeared first on NASASpaceFlight.com .

FULL STORY ======================================================================

SpaceX is readying to use its reliable Falcon 9 rocket to send a privately funded mission to the surface of the moon. However, HAKUTO-R Mission 1,
slated to lift off from Space Launch Complex 40 (SLC-40) at the Cape
Canaveral Space Force Station (CCSFS), is now awaiting a new launch date.

An initial launch window on the morning of Wednesday, Nov. 30 was forgone to allow for additional pre-flight checkouts. A backup opportunity on Dec. 1 was called off after further inspections of the launch vehicle and data review.



This is a mission that has been more than a decade in the making. The company behind the mission, ispace, began in Japan as a competitor in the Google
Lunar XPRIZE. The goal of this particular XPRIZE was to become the first private lunar exploration mission. Ispace decided to call the mission HAKUTO, which means white rabbit in Japanese.

See Also HAKUTO-R Updates NSF Store L2 SpaceX Section Click here to Join L2

History of HAKUTO

In 2015, the team reached a major milestone, completing a successful rover demonstration, which earned them $500,000. Just two years later, the team had a flight-ready rover at its first launch site. However, the primary
spacecraft did not fulfill its part of the mission, therefore the joint ride to the moon was canceled.

Fast forward to 2018, and the mission was revived as HAKUTO-R, the R standing for reboot. It will consist of a series of missions to the lunar surface.

This launch will be called Mission 1 (M1), with the main objectives including validating the landers design as well as the companys business model. The 10 main objectives for M1. (Credit: ispace)

In a release from ispace, the company outlined the exact ten goals they are hoping to complete on this mission. Completion of Launch Preparations Completion of Launch and Deployment Establishment of a Steady Operation State Completion of First Orbital Control Maneuver Completion of stable deep-state flight operations for one month Completion of all deep space orbital control maneuvers before LOI Reaching the lunar gravitational field/lunar orbit Completion of all orbit control maneuvers in lunar orbit Completion of the lunar landing Establishment of a steady system state after the lunar landing

The lander itself, built at ArianeGroup GmbHs facility in Lampoldshausen, Germany, is 2.3 meters tall (7.5 feet), 2.6 meters wide (8.5 feet), and has a dry mass of 340 kilograms (750 pounds). Launch preparations have been completed, including integration of the #HAKUTO_R Mission 1 lunar lander into the @SpaceX Falcon 9 rocket! First success milestoneSuccess 1 Completion of Launch Preparationsfulfilled. Read more: https://t.co/eujElScggq #ispace #lunarquest pic.twitter.com/K2oJgLAime

ispace (@ispace_inc) November 28, 2022



The landing site chosen for this mission is called Atlas Crater. It is
located on the southeastern outer edge of Mare Frigoris, translated in
English as the Sea of Cold. The exact targeted coordinates, according to ispace, are 47.5 N, 44.4 E. Additional backup sites include Sinus Iridum, Lacus Somniorum, and Oceanus Procellarum, all of which are roughly at the
same latitude to allow for adequate sun exposure. Landing is expected to
occur at the end of April 2023.

Additional Payloads

This mission will include additional payloads for both lunar orbit and the lunar surface.

A small lunar rover named Rashid will drive around the surface. The small rover was developed by Mohammed bin Rashid Space Centre in the United Arab Emirates. Rashid, the first lunar lander for the United Arab Emirates, undergoing environmental tests. (Credit: MBRSC)

The Japanese Aerospace Exploration Agency (JAXA) will also have its own lunar robot which the agency says is approximately the size of a baseball. Additional private experiments will also be onboard, although the exact details of each additional payload are not available.

The company says one final payload was also added; a music disc containing
the song SORATO by the Japanese rock band Sakanaction will travel to the
lunar surface. The song, according to ispace, was written in support of Team HAKUTO during the Google Lunar XPRIZE. In addition, the initial name for the lunar lander was called Sorato.

The Falcon 9 carrying these payloads will also contain a CubeSat bound for
the moon. The secondary payload developed by NASAs Jet Propulsion Laboratory named Lunar Flashlight will enter a highly elliptical lunar orbit which will have it pass approximately 15 kilometers over the moons south pole. The goal is to use lasers to look for evidence of water ice. The Lunar Flashlight CubeSat will use this launch as a rideshare to the moon. (Credit: NASA/JPL-Caltech)

This payload was originally supposed to fly on the Artemis I mission,
however, due to the launch delay from its original August attempt, the satellite was instead placed onboard this launch.

The Launch Vehicle

The Falcon 9 taking these payloads to orbit will be making its fifth flight, all five of which occurred from SLC-40.

B1073, the first stage booster, has previously launched SES-22 in May 2022 as well as three Starlink missions in May, August, and September.

The launch profile for this mission will include a Return to Launch Site (RTLS) landing for B1073, as opposed to landing on a drone ship in the Atlantic Ocean. It will touch down at Landing Zone 1 (LZ-1) just minutes
after liftoff.

SpaceX does have a marine asset deployed for this mission. Fairing recovery ship Doug is parked approximately 460 kilometers (285 miles) to the east of SLC-40. The vessel will recover the two protective halves, known as fairings, that cover the spacecraft while it speeds through Earths atmosphere.

Flight Profile

35 minutes before liftoff, equipment at the launch pad will begin to load the Falcon 9 with RP-1 fuel, a type of refined kerosene. At the same time, liquid oxygen (LOX), the oxidizer for the Falcon fleet of rockets, begins loading into the first stage. B1073, the same booster used for HAKUTO-R, flies on SES-22 in June 2022. (Credit: Stephen Marr for NSF)

Thats followed by LOX load onto the second stage at T-16 minutes to liftoff. Seven minutes before launch, the engines are chilled to prime them ahead of the supercooled cryogenics that will flow through them at liftoff.

At T-1 minute, Falcon 9 goes into startup, meaning the onboard computers have full control of the countdown as the propellant tanks are pressurized for flight. At T-3 seconds, the command is given to ignite the nine Merlin 1-D engines at the base of the first stage followed by liftoff at T0.

At T+1 minute 12 seconds, the rocket encounters Max-Q, thats when the maximum aerodynamic forces are pushing down on Falcon and HAKUTO-R on its ascent through the atmosphere.

At approximately T+2 minutes 13 seconds, a series of events in quick succession begins. The first stage engines will have main engine cutoff (MECO), followed three seconds later by separation of the first and second stages. About eight seconds after that, the second stage engine will start in whats known as SES-1. Just after 3 minutes into flight, the fairing halves will separate and begin their journey back towards the Atlantic Ocean for recovery and reflight.

While the second stage Merlin Vacuum (MVac) engine continues its five-and-a-half-minute-long burn to bring HAKUTO-R into an initial parking orbit, the first stage will use its attitude control thrusters to perform a flip maneuver, aiming it on a trajectory back towards LZ-1. First Falcon 9 Booster landing at LZ-1. (Credit: SpaceX)

At T+6 minutes 33 seconds, an entry burn, uses three engines to help slow the first stage booster down as well as protect it from excessive heating as it begins encountering the atmosphere once again.

At T+7 minutes 43 seconds, B1073 will fire one single engine one last time, deploying a set of previously stowed landing legs, touching down gently at LZ-1. While this is happening, at T+7 minutes 52 seconds, we should receive confirmation of Second Engine Cutoff 1 (SECO-1), meaning the second stage and the payload should be in an initial parking orbit.

A second ignition of the MVac engine will occur at T+39 minutes 49 seconds, lasting 55 seconds. This will be the final burn before HAKUTO-R is deployed
on its journey to the moon 46 minutes and 38 seconds after lifting off. NASAs Lunar Flashlight will stay onboard Falcon 9 for a few more minutes, deploying 52 minutes and 48 seconds into flight.

This launch will mark the 189th all-time flight of a Falcon 9 rocket, and the 54th of the year. Adding in Falcon Heavy, SpaceX will have flown 55 missions year-to-date.

This would also mark the 22nd all-time successful landing at LZ-1 and/or LZ-2 at the CCSFS and the sixth booster to stand vertical there this year
including Falcon 9 and Falcon Heavy boosters.

(Lead photo: Falcon 9 vertical at SLC-40 with HAKUTO-R M1. Credit: SpaceX)

The post SpaceX delays Falcon 9 launch carrying private Japanese moon lander appeared first on NASASpaceFlight.com .



======================================================================
Link to news story:
https://www.nasaspaceflight.com/2022/11/hakuto-r-m1/


--- Mystic BBS v1.12 A47 (Linux/64)
* Origin: tqwNet Science News (1337:1/100)