Oil forecasting technique adapted for spreadsheets may cut shale
operator costs
3D reservoir models predict the amount of oil in shale wells, but they
are usually very complicated and slow

Date:
June 22, 2020
Source:
Texas A&M University
Summary:
Porous rock containing oil and natural gas are buried so deep
inside the earth that shale operators rely on complex models of the
underground environment to estimate fossil fuel recovery. These
simulations are notoriously complex, requiring highly-skilled
operators to run them.

These factors indirectly impact the cost of shale oil production
and ultimately, how much consumers pay for their fuel.



FULL STORY ========================================================================== Porous rock containing oil and natural gas are buried so deep inside the
earth that shale operators rely on complex models of the underground environment to estimate fossil fuel recovery. These simulations are
notoriously complex, requiring highly-skilled operators to run them. These factors indirectly impact the cost of shale oil production and ultimately,
how much consumers pay for their fuel.


========================================================================== Researchers at Texas A&M University have developed an analytical procedure
that can be used in spreadsheets to predict the amount of oil and gas
that can be recovered from newly drilled wells. By modeling the pattern
of oil and gas flow from older wells in the same drilling field, the researchers said they can now accurately forecast the rate of oil and
gas flow for newer wells, a framework that is quicker and easier to use
than complicated reservoir simulations.

"In the oil and gas industry, professionals use sophisticated reservoir simulators to get a sense of how much hydrocarbons can be recovered
from the layers below the Earth's surface. These simulations are very
useful but extremely time-consuming and computationally intense,"
said Dr. Ruud Weijermars, professor in the Harold Vance Department of
Petroleum Engineering.

"We can now do the same kind of predictions as these simulations in a spreadsheet environment, which is much faster, saving a lot of time and
cost for shale operators, without loss of accuracy." The researchers
described their findings in the March issue of the journal Energies.

Shale rocks containing oil and gas are crammed within layers that are
between 3,000 and 14,000 feet underground. To access these fossil fuels,
holes are first drilled vertically into the ground with the help of high-powered drills to reach the shale rock layers. The drill bit then
moves in horizontally, parallel to the shale deposits. When the rocks surrounding the horizontal borehole are forced to crack by hydraulic fracturing, they begin to release valuable oil and natural gas molecules,
which then rush into the borehole and rise up to storage tanks at the
surface.

Before the drilling operation begins, a 3D model of the reservoir is
generally created to predict the amount of oil that can be recovered
from the wells.

These models consider the permeability of rocks, underground geography
and seismic features, among other parameters. With these inputs in place,
the model virtually tiles the reservoir into small blocks, or cells,
and then simulates the flow of oil through these individual blocks based
on the difference in pressure on the different faces of the block.



========================================================================== "These simulations can run from hours to days to weeks, depending upon the number of blocks within a grid," said Weijermars. "So, if the reservoir
model has a billion cells, you would have to compute how these billion
cells behave and interact to know what the resulting oil flow will be."
To circumvent these complicated mathematical computations, Weijermars and
his team focused their attention on the flow of oil within a single cell
in an existing well. First, they calculated the flow of oil from the
fracture site into the single cell using physics-based equations. By
assuming that all the flow cells within a well are identical, they
were able to scale up and obtain the oil flow rate for a period of
several months' timeNOT using an analytical procedure called decline
curve analysis.

The researchers then compared the predictions made by their method
against those of the simulations and found that the two matched very
well. However, unlike complex simulations, the researchers said their spreadsheet-based analysis was much quicker.

Once the researchers modeled the flow rate from an existing well,
they could predict and improve the behavior of new wells by tweaking
some aspect of the flow cells, such as the height, length or spacing
of hydraulic fractures and between wells. Furthermore, they noted that
this type of analysis could be done before drilling the new wells so
that oil and gas recovery from the lease region can be maximized.

The researchers also said that unlike reservoir simulations that require
highly trained professionals to run them, their spreadsheets can be used
by technicians with very little training.

"Shale operators need to cut costs tremendously because of low global
prices of crude oil. However, they also need to forecast and improve
the performance of the new wells that they plan to drill," said
Weijermars. "We have tested our spreadsheet-based flow-cell analysis
against sophisticated reservoir simulators in a series of studies,
and the flow-cell model does a great job. This is good news for shale
operators -- our technique helps them cut costs and is also much faster."
Other contributors to this research include Kiran Nandlal, Dr. Aadi
Khanal and Dr. Fatih Tugan from the petroleum engineering department.

This research was funded by the Crisman-Berg Hughes consortium and
startup funds from the Texas A&M Engineering Experiment Station.


========================================================================== Story Source: Materials provided by Texas_A&M_University. Original
written by Vandana Suresh.

Note: Content may be edited for style and length.


========================================================================== Journal Reference:
1. Ruud Weijermars, Kiran Nandlal. Pre-Drilling Production Forecasting
of
Parent and Child Wells Using a 2-Segment Decline Curve Analysis
(DCA) Method Based on an Analytical Flow-Cell Model Scaled
by a Single Type Well. Energies, 2020; 13 (6): 1525 DOI:
10.3390/en13061525 ==========================================================================

Link to news story: https://www.sciencedaily.com/releases/2020/06/200622152515.htm

--- up 21 weeks, 6 days, 2 hours, 34 minutes
* Origin: -=> Castle Rock BBS <=- Now Husky HPT Powered! (1337:3/111)