1. Forum
  2. fsxNet
  3. FSX NET

  • Hub 3 updated configuration

    From deon@21:2/116 to All on Sun May 28 16:17:05 2023
    Hey Folks, and especially those hanging off of hub 3.

    I've switched Hub 3 over to it's own IP address - I was fortunate enough to get an allocation of IPv4 addresses - so the hub is now on it's own IPv4 address. It's still also available via IPv6 as well.

    I also changed the setup, connections are now through haproxy.

    For everybody, there should be no noticable difference - IE: you dont need to change anything on your side. Do let me know if something is not working as expected.




    ...лоеп
    --- SBBSecho 3.20-Linux
    * Origin: I'm playing with ANSI+videotex - wanna play too? (21:2/116)
  • From deon@21:2/116 to All on Sun May 28 17:36:14 2023
    Re: Hub 3 updated configuration
    By: deon to All on Sun May 28 2023 04:17 pm

    Hey Everyone,

    For everybody, there should be no noticable difference - IE: you dont need to change anything on your side. Do let me know if something is not working as expected.

    It suddenly occurred that there may be a change for some Hub 3 nodes.

    If you collect mail from hub 3, then the address to hub 3 has changed. (It actually changed a while ago, but I dont recall sending out a note to existing nodes). I have been using a CNAME from the old name to the new name, but it is best if folks can update their mailers to use the new DNS address. (The old domain will be retired at some point.)

    Hub 3 is available at n3.z21.bbs.dege.au or net3.fsxnet.nz (the later is a CNAME to the former).



    ...лоеп
    --- SBBSecho 3.20-Linux
    * Origin: I'm playing with ANSI+videotex - wanna play too? (21:2/116)
  • From acn@21:3/127.1 to deon on Sun May 28 17:48:00 2023
    Am 28.05.23 schrieb deon@21:2/116 in FSX_NET:

    Hallo deon,

    For everybody, there should be no noticable difference - IE: you dont need >> to change anything on your side. Do let me know if something is not working >> as expected.

    Thank you very much!

    Hub 3 is available at n3.z21.bbs.dege.au or net3.fsxnet.nz (the later is a CNAME to the former).

    So I've changed it from n3.z21.bbs.leenooks.net to n3.z21.bbs.dege.au,
    that's correct, right? :)

    Regards,
    Anna

    --- OpenXP 5.0.57
    * Origin: Imzadi Box Point (21:3/127.1)
  • From deon@21:2/116 to acn on Mon May 29 09:09:28 2023
    Re: Re: Hub 3 updated configuration
    By: acn to deon on Sun May 28 2023 05:48 pm

    So I've changed it from n3.z21.bbs.leenooks.net to n3.z21.bbs.dege.au, that's correct, right? :)

    Yup, that's it...


    ...лоеп
    --- SBBSecho 3.20-Linux
    * Origin: I'm playing with ANSI+videotex - wanna play too? (21:2/116)
  • From acn@21:3/127.1 to deon on Thu Jun 1 14:52:00 2023
    Am 29.05.23 schrieb deon@21:2/116 in FSX_NET:

    Hallo deon,

    So I've changed it from n3.z21.bbs.leenooks.net to n3.z21.bbs.dege.au,
    that's correct, right? :)

    Yup, that's it...

    Okay, thank you!

    Regards,
    Anna

    --- OpenXP 5.0.57
    * Origin: Imzadi Box Point (21:3/127.1)