• gherkin

    From Spectre@21:3/101 to Spectre on Sat Feb 13 04:20:00 2021
    Always something broken to fix...


    *** THE READER V4.50 [freeware]
    --- SuperBBS v1.17-3 (Eval)
    * Origin: Scrawled in haste at The Lower Planes (21:3/101)
  • From Vk3jed@21:1/109 to Spectre on Sun Feb 14 02:17:00 2021
    On 02-12-21 20:20, Spectre wrote to Spectre <=-

    Always something broken to fix...

    Yep. ;)


    ... Synonym: A word you use when you can't spell the other.
    === MultiMail/Win v0.52
    --- SBBSecho 3.10-Linux
    * Origin: Freeway BBS Bendigo,Australia freeway.apana.org.au (21:1/109)
  • From Spectre@21:3/101 to Vk3jed on Sun Feb 14 05:33:00 2021
    Always something broken to fix...

    Yep. ;)

    <Boggle> Not sure how that one left the building... if I recall right that was an early test that crashed and burned....

    I have to go back and fix it all again too.. :/ Because I couldn't figure out what the hell was going on, I simplified it back to essentially a single node setup... which means only one person can use the message base because all the MSGTMPs are in 1 location... not the dir per node arrangement. Which of course broke all the door setup too... <sigh>

    Spec


    *** THE READER V4.50 [freeware]
    --- SuperBBS v1.17-3 (Eval)
    * Origin: Scrawled in haste at The Lower Planes (21:3/101)
  • From Vk3jed@21:1/109 to Spectre on Mon Feb 15 23:11:00 2021
    On 02-13-21 21:33, Spectre wrote to Vk3jed <=-

    Always something broken to fix...

    Yep. ;)

    <Boggle> Not sure how that one left the building... if I recall right
    that was an early test that crashed and burned....

    Oopsies. ;) I don't envy you. I was glad to ditch HMB in 1992-1993, because it was just too difficult to manage with the volume of mail I was receiving. I lost count of how many times I blew up my HMB. LOL

    I have to go back and fix it all again too.. :/ Because I couldn't
    figure out what the hell was going on, I simplified it back to
    essentially a single node setup... which means only one person can use
    the message base because all the MSGTMPs are in 1 location... not the
    dir per node arrangement. Which of course broke all the door setup
    too... <sigh>

    Ouch. :( Yeah I've never done a DOS multinode setup, only had one line back in the day, and now only doors I run are stock JS ones on Synchronet and MPL on Mystic.


    ... NO CARRIER? How are we gonna land this modem?
    === MultiMail/Win v0.52
    --- SBBSecho 3.10-Linux
    * Origin: Freeway BBS Bendigo,Australia freeway.apana.org.au (21:1/109)
  • From Spectre@21:3/101 to Vk3jed on Tue Feb 16 04:39:00 2021
    Always something broken to fix...

    Oopsies. ;) I don't envy you. I was glad to ditch HMB in 1992-1993,

    Welll.. I might keep using the hudson for local stuff... I did discover that "The Reader" should handle squish/jam bases... however as there's not config for it in Super, I'll have to go the "Other" BBS software and massage a config file for it to eat and find a spot to put them.

    Ouch. :( Yeah I've never done a DOS multinode setup, only had one
    line back in the day, and now only doors I run are stock JS ones

    The worst part about multi-node on SBBS or pre 2.x RA was always the inconsistency of where config files live. Super says keep everything in the \sbbs dir, then run a config in the node dir. If you exec from the node dir thats the config it will use, it'll also put the dorinfoX.def files and anything else that belongs to the node in there too. But you have doors and other stuff looking for files in weird places \sbbs, \sbbs\nodeX, their own dir. I find its a bit like trying to be all things to all people. You just have to keep wrassling it until it works the way you want it to.

    Spec


    --- SuperBBS v1.17-3 (Eval)
    * Origin: < Scrawled in blood at The Lower Planes > (21:3/101)
  • From Vk3jed@21:1/109 to Spectre on Tue Feb 16 05:22:00 2021
    On 02-15-21 20:39, Spectre wrote to Vk3jed <=-

    Always something broken to fix...

    Oopsies. ;) I don't envy you. I was glad to ditch HMB in 1992-1993,

    Welll.. I might keep using the hudson for local stuff... I did discover that "The Reader" should handle squish/jam bases... however as there's
    not config for it in Super, I'll have to go the "Other" BBS software
    and massage a config file for it to eat and find a spot to put them.

    When I upgraded from RA 1.1 to 2.x, I started migrating message areas to JAM. By the time the BBS closed, only netmail and a handful of low volume echos were left in HMB. The rest had been migrated to JAM, and any new echos from the time RA 2.0 was installed were created as JAM.

    Ouch. :( Yeah I've never done a DOS multinode setup, only had one
    line back in the day, and now only doors I run are stock JS ones

    The worst part about multi-node on SBBS or pre 2.x RA was always the inconsistency of where config files live. Super says keep everything
    in the \sbbs dir, then run a config in the node dir. If you exec from
    the node dir thats the config it will use, it'll also put the
    dorinfoX.def files and anything else that belongs to the node in there too. But you have doors and other stuff looking for files in weird
    places \sbbs, \sbbs\nodeX, their own dir. I find its a bit like trying
    to be all things to all people. You just have to keep wrassling it
    until it works the way you want it to.

    Hmm, what a pain. :/


    ... Only those who attempt the absurd can achieve the impossible.
    === MultiMail/Win v0.52
    --- SBBSecho 3.10-Linux
    * Origin: Freeway BBS Bendigo,Australia freeway.apana.org.au (21:1/109)
  • From Spectre@21:3/101 to Spectre on Fri Feb 12 20:20:00 2021
    Always something broken to fix...


    *** THE READER V4.50 [freeware]
    --- SuperBBS v1.17-3 (Eval)
    * Origin: Scrawled in haste at The Lower Planes (21:3/101)
  • From Vk3jed@21:1/109 to Spectre on Sat Feb 13 18:17:00 2021
    On 02-12-21 20:20, Spectre wrote to Spectre <=-

    Always something broken to fix...

    Yep. ;)


    ... Synonym: A word you use when you can't spell the other.
    === MultiMail/Win v0.52
    --- SBBSecho 3.10-Linux
    * Origin: Freeway BBS Bendigo,Australia freeway.apana.org.au (21:1/109)
  • From Spectre@21:3/101 to Vk3jed on Sat Feb 13 21:33:00 2021
    Always something broken to fix...

    Yep. ;)

    <Boggle> Not sure how that one left the building... if I recall right that was an early test that crashed and burned....

    I have to go back and fix it all again too.. :/ Because I couldn't figure out what the hell was going on, I simplified it back to essentially a single node setup... which means only one person can use the message base because all the MSGTMPs are in 1 location... not the dir per node arrangement. Which of course broke all the door setup too... <sigh>

    Spec


    *** THE READER V4.50 [freeware]
    --- SuperBBS v1.17-3 (Eval)
    * Origin: Scrawled in haste at The Lower Planes (21:3/101)
  • From Vk3jed@21:1/109 to Spectre on Mon Feb 15 15:11:00 2021
    On 02-13-21 21:33, Spectre wrote to Vk3jed <=-

    Always something broken to fix...

    Yep. ;)

    <Boggle> Not sure how that one left the building... if I recall right
    that was an early test that crashed and burned....

    Oopsies. ;) I don't envy you. I was glad to ditch HMB in 1992-1993, because it was just too difficult to manage with the volume of mail I was receiving. I lost count of how many times I blew up my HMB. LOL

    I have to go back and fix it all again too.. :/ Because I couldn't
    figure out what the hell was going on, I simplified it back to
    essentially a single node setup... which means only one person can use
    the message base because all the MSGTMPs are in 1 location... not the
    dir per node arrangement. Which of course broke all the door setup
    too... <sigh>

    Ouch. :( Yeah I've never done a DOS multinode setup, only had one line back in the day, and now only doors I run are stock JS ones on Synchronet and MPL on Mystic.


    ... NO CARRIER? How are we gonna land this modem?
    === MultiMail/Win v0.52
    --- SBBSecho 3.10-Linux
    * Origin: Freeway BBS Bendigo,Australia freeway.apana.org.au (21:1/109)
  • From Spectre@21:3/101 to Vk3jed on Mon Feb 15 20:39:00 2021
    Always something broken to fix...

    Oopsies. ;) I don't envy you. I was glad to ditch HMB in 1992-1993,

    Welll.. I might keep using the hudson for local stuff... I did discover that "The Reader" should handle squish/jam bases... however as there's not config for it in Super, I'll have to go the "Other" BBS software and massage a config file for it to eat and find a spot to put them.

    Ouch. :( Yeah I've never done a DOS multinode setup, only had one
    line back in the day, and now only doors I run are stock JS ones

    The worst part about multi-node on SBBS or pre 2.x RA was always the inconsistency of where config files live. Super says keep everything in the \sbbs dir, then run a config in the node dir. If you exec from the node dir thats the config it will use, it'll also put the dorinfoX.def files and anything else that belongs to the node in there too. But you have doors and other stuff looking for files in weird places \sbbs, \sbbs\nodeX, their own dir. I find its a bit like trying to be all things to all people. You just have to keep wrassling it until it works the way you want it to.

    Spec


    --- SuperBBS v1.17-3 (Eval)
    * Origin: < Scrawled in blood at The Lower Planes > (21:3/101)
  • From Vk3jed@21:1/109 to Spectre on Mon Feb 15 21:22:00 2021
    On 02-15-21 20:39, Spectre wrote to Vk3jed <=-

    Always something broken to fix...

    Oopsies. ;) I don't envy you. I was glad to ditch HMB in 1992-1993,

    Welll.. I might keep using the hudson for local stuff... I did discover that "The Reader" should handle squish/jam bases... however as there's
    not config for it in Super, I'll have to go the "Other" BBS software
    and massage a config file for it to eat and find a spot to put them.

    When I upgraded from RA 1.1 to 2.x, I started migrating message areas to JAM. By the time the BBS closed, only netmail and a handful of low volume echos were left in HMB. The rest had been migrated to JAM, and any new echos from the time RA 2.0 was installed were created as JAM.

    Ouch. :( Yeah I've never done a DOS multinode setup, only had one
    line back in the day, and now only doors I run are stock JS ones

    The worst part about multi-node on SBBS or pre 2.x RA was always the inconsistency of where config files live. Super says keep everything
    in the \sbbs dir, then run a config in the node dir. If you exec from
    the node dir thats the config it will use, it'll also put the
    dorinfoX.def files and anything else that belongs to the node in there too. But you have doors and other stuff looking for files in weird
    places \sbbs, \sbbs\nodeX, their own dir. I find its a bit like trying
    to be all things to all people. You just have to keep wrassling it
    until it works the way you want it to.

    Hmm, what a pain. :/


    ... Only those who attempt the absurd can achieve the impossible.
    === MultiMail/Win v0.52
    --- SBBSecho 3.10-Linux
    * Origin: Freeway BBS Bendigo,Australia freeway.apana.org.au (21:1/109)